PRODUCTS

JH30

Chemical composition 化学成分

聚酯增塑剂

己二酸聚酯

Polyester Plasticizer

Polyester based on Adipic acid

Molecular weight 分子量

3000-4000

Specifications 规格说明

Liquid Properties 液体性能

  The figures above are typical values and are not intended as specification limits.

以上数据是典型数值只供参考，而不是技术指标规范。

Brief Descriptions 产品简介

JH30 is a polyester plasticizer,which is a colorless or yellowish oily viscous limpid liquid with a characteristic odour and free from matter in suspension. It is miscible with common organic solvents, immiscible with water and miscible with most of the plasticizers used in the processing of PVC.

JH30是一种聚酯增塑剂，是一种无色或浅黄色油状粘稠透明液体，具有独特的气味，不含机械杂质。能溶于大部分有机溶剂，但不溶于水，与大部分增塑剂混溶用于PVC工艺的加工。

JH30 tends to crystallize at the room temperature. Nevertheless it melts by heating, without any quality problem.

JH30在常温下有结晶析出，如出现结晶，加热后熔化，不影响使用。

The product JH30 due to its nature does not have a shelf life. However, it can be stored in appropriate containers at a temperature of approximately 25°C and the exclusion of humidity for at least 1 year, without losing its chemical properties. Nevertheless,  re-testing of properties is recommended every 6 month from the production date.

JH30由于其特性没有设定储存期。但是在温度大约为25℃且有效除湿的条件下，将其储存于适当的容器内至少一年不会失去其化学特性。不过我们仍建议在未使用的每六个月应重新检验，以获得最佳的使用效果。

For further information on the characteristics and properties of JH30 in the liquid state, see the relevant

standard Materials Safety Data Sheet.

如需有关JH30的液态特性和性能的更多信息，请参阅相关标准「物质安全数据表」(MSDS)。

Performance advantages of Polyester plasticizers 聚酯增塑剂的性能优势

Our polyester plasticizers for PVC compound offer to users and compounders many of the performance advantages, which shows an unique balance of properties that can be summarized as follows: 

我们的聚酯增塑剂用于聚氯乙烯增塑剂为用户和配方者提供了许多性能优势，其独特优势归纳如下:

·   Processability and efficiency 加工性能和效率

Eexcellent compatibility with PVC and high plasticizing.

粘度适中，与PVC的兼容性良好，可塑化效率高。

·   Permanence and compatibility持久性

Polyester plasticizer based on its polymeric polymer structure, the PVC products provides excellent migration  resistance of ABS and PS sheet,it is known to be the most resistant to migration of all plasticizers.compared with monomer plasticizers, It has most excellent of low volatility and solvent extraction resistance, especially oil resistance and organic solvent extraction resistance , known as permanent plastic agent.

聚酯增塑剂基于其聚合高分子结构，其PVC制品对ABS与PS板材的耐移性极佳，是已知所有增塑剂中耐迁移性能最优越的品种。具有优异的低挥发性和耐溶剂抽出性能，尤其是耐油性和耐有机溶剂萃取性能是其他单体增塑剂无法匹敌的，素有永久可塑剂之称。

· Environmental compliance环保符合性

This product has certificated by SGS,it is a non-phthalate polyester plastic agent, in line with the  

European and American national laws and regulations limit requirements.

本产品已通过SGS认证，属non-phthalate聚酯增塑剂，符合欧美国家法规限值要求。因其不含毒性大的苯环，适用于环保要求更高的食品、医疗和玩具等相关领域。

Characteristics and Applications of JH30

JH30的特性及应用

· JH30 具有以下性能优势: 

JH30 是一种性能优异的主增塑剂，增塑效率较高，具有优良的低挥发性和耐热性，是生产耐温105℃电缆及PVC制品的理想增塑剂。

· JH30 can be used in a wide range of applications for such as: 

JH30的应用范畴广阔，其中包括：

Migration-resistant wire and cable 耐迁移电线电缆；

Oil-resistant and Non-migration wire and cable 耐油电线电缆

Non-migration leather 耐迁移皮革

Oil-Resistant Pipelines 耐油管

Gasket 密封圈

Film 薄膜

Pipelines for food 食品用软管

Oil-Resistant Gloves,Boots etc 耐油手套、鞋等

·JH30 is a technical grade product. Should you have more specific needs, you are invited to contact our sales offices or representative agencies.

JH30是一款技术级产品。如果您有更具体的需求，请与我们的销售办事处或代理机构联系。

General properties in PVC compounds 在PVC化合物中的一般特性

The properties of JH30 were evaluated by the following formulation:

用如下配方，对JH30的性能进行评估如下：

The specimens were prepared by calendering and moulding to obtain the thickness required for the different test methods.

采用密炼、压制和制模工艺以取得不同测试方法所需厚度的试片。

Results 结果

In the tests according to the UL standard, compounds were aged in an oven with 220 air changes/hour.

此测试按照美国UL标准，化合物在烘箱内经220次空气换气/小时进行老化处理。

The information contained here is correct and accurate and is based on our technical and scientific knowledge at the date of going to press.

本数据所含信息是正确和准确的，是基于我们在出版前对技术和科学知识的总结。

Such information is, in all cases, relevant only with respect to the product as used in its pure state and only for the uses referred to in this publication.

所含信息仅限于所用产品为纯物质的情况下，此刊物仅供用户参考。

Nothing stated here may be taken or construed as implying a breach of existing patents.

任何陈述都不应被视为或理解为侵犯已有的专利。

No warranty, either expressed or implicit, is given with regard to the results to be obtained from using this information.

任何所述或所喻，本公司不对使用此信息造成的后果承担责任。